DIN 976
Din 976 thread bar is commonly known as threaded pin. It has no head and is a fastener composed of threaded column with full thread.
Different from the double head stud, the tooth bar is not limited to the thread length limit, so it is convenient to use. Din976 is similar to din975, except that din976 is shorter and has chamfering at both ends
- Material: Carbon Steel
- Head Type: Chamfering both ends
- Size: M2 ~ M72 Length: less than 6meters
- Surface Finish: Plain, Black, Zinc Plated, Yellow Plated,
- Grade: class 4.8, class 5.8, class 8.8, class 10.9
DIN 976 Product Details
Din 976 tooth bar refers to German standard din976-1986, which specifies full thread screw rod with thread diameter of m2-m52. According to the new EU standard, all teeth are now in accordance with din976
Din976 can be divided into carbon steel
The performance grade of carbon steel tooth is : class 4.8, class 5.8, class 8.8, class 10.9
Carbon steel materials generally need surface treatment. There are many kinds of surface treatment, such as electroplating, oxidation, phosphating, non electrolytic zinc coating, etc. The surface treatment of din976 carbon steel is usually galvanized passivation or no treatment.
Galvanizing passivation is to form an inert passivation layer on the surface of zinc coating, which can avoid the natural oxidation of zinc in the air, improve the overall protection performance and improve the appearance quality of the coating. Zinc coating itself is white yellow, brightness is not high, must be passivated to appear white or color.
Din976 teeth are usually used in construction industry, equipment installation, decoration and other connectors, such as: large supermarket ceiling, building wall fixation, etc.
