DIN 7504

DIN 7504 Self-drilling tapping screws are usually classified as self tapping screws and self tapping teeth. The tail of self drilling screws is different from that of ordinary screws. It is not a sharp tail, but like a drill bit. This tail can drill holes by itself.

DIN 7504 Product Details

DIN 7504 Self-drilling tapping screws
type: DIN7504N, DIN7504P, DIN7504K,DIN7504R,DIN7504O

The tail of the drilling tail screw is in the shape of drill tail or sharp tail, without auxiliary processing, it can directly drill, tap and lock on the setting materials and basic materials, thus greatly saving the construction time. Compared with ordinary screw, it has high tenacity and maintenance force, long time after combination and no loosening. It is easy to use safe drilling and tapping once.

Purpose: it is a kind of screw, which is mainly used to fix the colored steel tile of steel structure, and also can be used to fix the sheet material of simple building. It cannot be used for metal to metal bonding.

Material and model
There are two kinds of materials: Iron and stainless steel, among which stainless steel is divided into many kinds of materials.

The models are: Φ 4.2 / Φ 4.8 / Φ 5.5 / Φ 6.3mm, and the specific length can be determined according to the requirements.

According to the different drilling tails, they can be divided into:
Round head rice / Cross / plum blossom, countersunk head (flat head) / rice / Cross / plum blossom, hexagonal flower head, round head flower head (big flat head), trumpet head, etc

Mechanical performance requirements
Drill tail screw
1. Core hardness: Standard: hrc32-40
2. Surface hardness: Standard: hv600-700
3. Cemented layer: 4 × 10-6 × 10:0.05-0.18mm 8-12:0.10-0.23mm 14:0.15-0.28mm

DIN7504 K

DIN 7504 (K) a
DIN 7504 (K)

DIN7504 L

DIN 7504 (L) a
DIN 7504 (L)

DIN7504 M

DIN 7504 (M) a
DIN 7504 (M)

DIN7504 R

DIN 7504 (R) a
DIN 7504 (R)

DIN7504 O

DIN 7504 (O) a
DIN 7504 (O)

We will reply your questions with 24 hours.

You may also like